Provide a 5 pages analysis while answering the following question: Mechanical Design and Optimization of Electronic Systems. Prepare this assignment according to the guidelines found in the APA Style
An abstract is required. Thermomechanical degradation of the interconnection between metallization traces different layers of a multilayer printed wiring board resulting from repeated thermal power cycling –conductive filament formation
Wire bonding is the method of making interconnections between an integrated circuit (IC) or other semiconductor device and its packaging during semiconductor device fabrication therefore this process can lead to contact migration
Metallization can lead to an Electromigration which is a process that results from the momentum transfer from the electrons which move in the applied electric field, to ions which make up the lattice of the interconnect material
9. Bond pad refers to the process used to connect the circuit on the die pin on a packaged chip that can result in Electrostatic discharge/ electrical overstress due to the process of the bonding pad creations
The gate oxide refers to the dielectric layer that separates the gate terminal of a MOSFET from the underlying source and it also drains and which makes it very critical to every transistor – hot carrier injection
13. The major flip-chip bonding technology includes multiple interconnections and low parasitic resistance and inductance. Ground bumps and many powers can also be placed in an area array configuration in the die center. The several characteristics of the FC-BGA package to accommodate the bumped die include:- the fine design rules, low resistance and the dielectric losses, the impedance matching, ground inductance, and low power, the low-inductance decoupling capacitance, low thermal resistance, and excellent package and second-level-packaging reliability.
These fans (filter fans) are very durable, attractive plastic grilles that contribute to a clean, linear design. They also have an extremely flat profile, which blends well with modern enclosures and keeps the unit from protruding from the cabinet wall.
